Fiber laser cutting in Russellville, Arkansas
4000 watt fiber resonators, dual shuttle tables and sheets up to 5' x 10'. Prototype parts or production runs, held to ±.005".

Why fiber
Fiber lasers cut faster with minimal setup and lower operating costs, and those savings show up in the price of your parts. The dual shuttle tables load the next sheet while the current one cuts.
What it holds
Holes, slots, edges and contours located to ±.005" of finish size, with a minimal heat-affected zone and minimal taper. The beam never touches the material, so there is nothing to clamp or align.
Fewer machining steps
Large contours, hole patterns and tight curve radii come straight off the laser through the full thickness, which can cut down or remove machining on parts you used to mill.
| Material | Up to |
|---|---|
| HRPO (hot rolled, pickled & oiled) | 5/8" |
| Stainless steel | 1/2" |
| Aluminum | 3/8" |
| Galvanized and galvanneal | Yes |
| Copper and brass | Yes |
- Sheets up to 5' x 10'
- Dual shuttle tables
- Prototype to production
- Minimal HAZ
- Zero contact cutting
- Short setup times
Common questions
How thick can you laser cut?
HRPO up to 5/8", stainless steel up to 1/2" and aluminum up to 3/8". Galvanized, galvanneal, copper and brass are also cut.
What tolerance does the laser hold?
Features are held to within ±.005" of the finish dimensions, with tight repeatability from part to part.
Do you cut one-off prototypes?
Yes. The laser runs prototype quantities through to medium and high production runs.
Get a quote: Fiber laser cutting
Rush job? Call (479) 890-3884 or email quotes@acccutting.com.
- The part: a drawing or file (.dwg, .dxf, .stp, .iges, Parasolid) or a sketch, sample or PDF.
- Material and thickness, plus any finish or powder color.
- Quantity and due date. Most quotes come back in one business day.